Solid State Sound Devices

INSTALL

Microphones & Headphones

Other Audio Kit

Miscellaneous

Product Archive

AUDIO-TECHNICA AT8031
Unidirectional (Cardioid) Condenser General Purpose Microphone

The AT8031 is one of two excellent unidirectional (cardioid) condenser mics from Audio-Technica (the other is the AT8033 below). This one is the slightly larger of of the two and a great favourite here at Solid State. It is ideal for voice-over and provides added warmth when used close up. Great for narration, its sound is similar to far more expensive studio microphones. Its cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source.

Click here for a PDF leaflet on the AT8031

Main Specifications

Element: Condenser
Polar Pattern: Cardioid
Frequency Response: 30 - 20,000Hz
Open Circuit Sensitivity: -44dB (6.3mV) re: 1V @ 1Pa (Phantom); -45dB (5.6mV) re: 1V @ 1Pa (Battery)
Impedance: 250 Ohms (Phantom); 300 Ohms (Battery)
Maximum Input SPL.:137dB SPL, 1kHz @ 1% T.H.D. (Phantom); 123dB SPL, 1kHz @ 1% T.H.D. (Battery)
Signal to Noise Ratio: 70 dB (at 1kHz/1Pa)
Power Requirements: 11-52VDC Phantom, 2mA typical
Battery Type: 1.5V AA / UM3
Battery Current/Life: 0.4mA / 1200 hours typical
High Pass Filter Switch: Flat/Roll-Off (80Hz, 12dB/Octave)
Weight: 205g (7.2oz)
Dimensions: 193mm (7.60") long, 50.3mm (1.98") head diameter
Output Connector: Integral 3-pin XLRM-type
Supplied Accessories: AT8405a Stand Clamp; AT8114 foam windscreen; battery; soft protective pouch.

AT-ATM8031

Audio-Technica AT8031 Unidirectional Condenser General Purpose Microphone (requires XLRF-to-XLRM Microphone Lead - see bottom of Microphone Accessories section) - IN STOCK

1

£135 ex Vat

£159 inc Vat

AUDIO-TECHNICA AT8033
Unidirectional (Cardioid) Condenser General Purpose Microphone

The AT8033 is one of two excellent unidirectional (cardioid) condenser mics from Audio-Technica. This one is the slightly smaller of of the two. It is a good all-rounder for both instrument and voice work. Like the AT8031 above it also good for spoken word and narration use, its sound being similar to far more expensive studio microphones. Its cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source.

Click here for a PDF leaflet on the AT8033

Main Specifications

Element: Condenser
Polar Pattern: Cardioid
Frequency Response: 30 - 20,000Hz
Open Circuit Sensitivity: -44dB (6.3mV) re: 1V @ 1Pa (Phantom); -45dB (5.6mV) re: 1V @ 1Pa (Battery)
Impedance: 250 Ohms (Phantom); 300 Ohms (Battery)
Maximum Input SPL.:137dB SPL, 1kHz @ 1% T.H.D. (Phantom); 123dB SPL, 1kHz @ 1% T.H.D. (Battery)
Signal to Noise Ratio: 70 dB (at 1kHz/1Pa)
Power Requirements: 11-52VDC Phantom, 2mA typical
Battery Type: 1.5V AA / UM3
Battery Current/Life: 0.4mA / 1200 hours typical
High Pass Filter Switch: Flat/Roll-Off (80Hz, 12dB/Octave)
Weight: 159g (5.6oz)
Dimensions: 194.2mm (7.65") long, 26mm (1.02") head diameter
Output Connector: Integral 3-pin XLRM-type
Supplied Accessories: AT8405a Stand Clamp; AT8136 foam windscreen; battery; soft protective pouch.

AT-ATM33A

Audio-Technica AT8033 Unidirectional Condenser General Purpose Microphone (requires XLRF-to-XLRM Microphone Lead - see bottom of Microphone Accessories section) - IN STOCK

1

£118 ex Vat

£139 inc Vat