Audio-Technica’s AT897 is designed for field audio acquisition in film/TV/video production, professional recording, wildlife recording and broadcast applications. This high-performance short shotgun offers outstanding long-distance audio pickup due to narrow acceptance angle of line + gradient design. It also features smooth, natural-sounding on-axis audio quality and excellent off-axis rejection of sound arriving from the sides and rear of mic. It can either be handheld using an optional pistol grip or boom pole (see under Recommended Accessories), or mounted on camcorder without adding noticeable heft. Excellent value and performance.

• Short length (11")

• Smooth, natural-sounding on-axis audio quality

• Provides the narrow acceptance angle desirable for long-distance sound pickup

• Excellent sound rejection from the sides and rear of mic

• Switchable low-frequency roll-off

• Operates on battery or phantom power

Click here for a PDF leaflet on this mic.

Main Specifications

Element: Fixed charge back plate, permanently polarised condenser
Polar Pattern: Super-Directional (Line + Gradient)
Frequency Response: 20 - 20,000Hz
Low Frequency Roll-Off: 80Hz, 12dB/octave
Open Circuit Sensitivity: -40dB (10.0mV) re: 1V @ 1Pa (Phantom); -41dB (8.9mV) re: 1V @ 1Pa (Battery)
Impedance: 200 Ohms (Phantom); 300 Ohms (Battery)
Maximum Input SPL.:129dB SPL, 1kHz @ 1% THD (Phantom); 115dB SPL, 1kHz @ 1% THD (Battery)
Dynamic Range (Typical): 112dB, 1kHz at Max SPL (Phantom); 98dB, 1kHz at Max SPL (Battery)
Signal to Noise Ratio: 77dB (at 1kHz/1Pa)
Power Requirements: 11-52VDC Phantom, 2mA typical
Battery Type: 1.5V AA / UM3
Battery Current/Life: 0.4mA / 1200 hours typical
Switch: flat, roll-off (recessed)
Weight (Microphone): 145g (5.1oz)
Dimensions: 279mm (10.98") long, 21mm (0.83") diameter
Output Connector: Integral 3-pin XLRM-type
Supplied Accessories: AT8405a stand clamp for 5/8"-27 threaded stands; AT8134 windscreen; battery; 5/8"-27 to 3/8"-16 threaded adapter; protective carrying case
Optional Reinhardt Pistol Grip & Whisper Wind-Gag - see our Microphone Accessories section
Optional Reinhardt Soft-Zep 2 Windshield, Grip & Cover - see our Microphone Accessories section

AT-AT897

Audio-Technica AT897 Short Shotgun Super-Directional Microphone (requires any of our Connectronics microphone leads - click here to be taken to a choice of these on our Microphone Accessories page) - IN STOCK

£269 each including Vat

At just 236mm (9.29") in length, the BP4029 provides broadcasters, videographers and sound recordists professional quality stereo audio in a microphone that resembles a monaural shotgun mic. That means the BP4029 is easy to use with standard pistol grips, windscreens and camera mounts. Engineered for long-distance pickup in broadcasting and film/TV production, this compact M-S stereo shotgun features internal matrixing innovations that allow for stereo audio with or without an external matrix. It also features switchable low-frequency roll-off and independent line-cardioid and figure-of-eight condenser elements. Phantom powering only.

• Designed for broadcasters, videographers and sound recordists

• Compact, lightweight design is perfect for pistol grip, boom and camera-mount use

• Independent Line-cardioid and Figure-of-eight condenser elements

• Switchable low-frequency roll-off

• Switch selection of non-matrixed M-S mode and two internally-matrixed left/right stereo modes

Click here for a PDF leaflet on this mic. (Please note this leaflet shows its former model number, AT835ST.)

Main Specifications

Element: Fixed charge back plate, permanently polarised condenser
Polar Pattern: Line Cardioid, Figure-of-8 (MS Stereo)
Frequency Response: 40 - 20,000Hz
Low Frequency Roll-Off: 80Hz, 12dB/octave
Open Circuit Sensitivity: Mid: -30dB (31.6mV); Side: -34dB (19.9mV); LR Stereo: -36dB re: 1V @ 1Pa
Impedance: 200 Ohms
Maximum Input SPL: Mid: 123dB SPL; Side: 127dB SPL; LR Stereo: 126dB SPL, 1kHz at 1% THD
Dynamic Range (Typical): Mid: 101dB; Side: 101dB; LR Stereo: 102dB, 1kHz at Max SPL
Signal to Noise Ratio: Mid: 72dB SPL; Side: 68dB SPL; LR Stereo: 70dB SPL, 1kHz at 1Pa
Power Requirements: 11-52VDC Phantom, 4mA typical at 48V, each channel
Switches: M-S, LR Stereo-Wide (LR-W); LR Stereo-Narrow (LR-N); flat, roll-off
Weight (Microphone): 103g (3.6oz)
Dimensions: 236mm (9.29") long, 21mm (0.83") diameter
Output Connector: Integral 5-pin XLRM-type
Cable: Dual 0.61m (24") shielded two-conductor, terminated in two XLR3M-type connectors
Supplied Accessories: AT8405a stand clamp for 5/8"-27 threaded stands; AT8134 windscreen; protective carrying case
Optional Reinhardt Pistol Grip & Whisper Wind-Gag - see our Microphone Accessories section
Optional Rode Blimp Windshield, Suspension & Grip - see our Microphone Accessories section

AT-BP4029

Audio-Technica BP4029 Stereo Short Shotgun Super-Directional Microphone (requires any of our Connectronics microphone leads - click here to be taken to a choice of these on our Microphone Accessories page) - IN STOCK

£719 each including Vat

Audio-Technica’s AT875R is designed for video production and broadcast (ENG/EFP) audio acquisition. Audio-Technica’s shortest shotgun microphone, it mounts conveniently on a boom pole or DV camcorder without adding noticeable heft. This high-performance microphone offers a narrow acceptance angle of line + gradient design. It also features smooth, natural-sounding on-axis audio quality and good off-axis rejection of sound arriving from the sides and rear of mic. If our other shotgun mic offerings are just a bit too long and you are prepared sacrifice only a little 'reach' for a shorter and more compact microphone, then the AT875R is for you.

• Designed for video production and broadcast (ENG/EFP) audio acquisition

• Extremely short length - under 175mm (7") long

• Provides the narrow acceptance angle desirable for long-distance sound pickup

• Good sound rejection from the sides and rear of mic

• Tailored response minimizes handling noise

• Operates on phantom power only

Click here for a PDF leaflet on this mic.

Main Specifications

Element: Fixed charge back plate, permanently polarised condenser
Polar Pattern: Directional (Line + Gradient)
Frequency Response: 90 - 20,000Hz
Open Circuit Sensitivity: -30dB (31.6mV) re: 1V @ 1Pa
Impedance: 100 Ohms
Maximum Input SPL.:127dB SPL, 1kHz @ 1% THD
Dynamic Range (Typical): 107dB, 1kHz at Max SPL
Signal to Noise Ratio: 74dB (at 1kHz/1Pa)
Phantom Power Requirements: 11-52VDC Phantom, 2mA typical
Weight (Microphone): 80g (2.8oz)
Dimensions: 175mm (6.89") long, 21mm (0.83") diameter
Output Connector: Integral 3-pin XLRM-type
Supplied Accessories: AT8405a stand clamp for 5/8"-27 threaded stands; windscreen; soft protective pouch
Optional Reinhardt Pistol Grip & Whisper Wind-Gag - see our Microphone Accessories section

AT-AT875R

Audio-Technica AT875R Ultra Compact Short Shotgun Directional Microphone (requires any of our Connectronics microphone leads - click here to be taken to a choice of these on our Microphone Accessories page) - IN STOCK

£149 each including Vat

The ATR55 offers intelligible reproduction for close-, medium-, and long-distance pickup. Two range settings are provided: "Normal" for close- to medium-distance recording; "Tele" for long-distance pickup. In its "Tele" range setting, this unidirectional condenser is engineered to pick up dialogue and sound effects at a distance, while bypassing ambient noise such as traffic, air-handling systems, room reverberation and mechanically coupled vibrations. ATR55 is equipped with a permanently attached 0.9 m (3') cable terminated with a 3.5mm mini-jack plug.

Main Specifications

Element: Condenser
Polar Pattern: "Normal" (Cardioid); "Tele" (Supercardioid)
Frequency Response: 70 - 18,000Hz
Open Circuit Sensitivity:  "Normal": -56dBm; "Tele": -45dBm (1kHz @ 1 Pa)
Impedance: "Normal": 1000 Ohms +/-30%; "Tele": 2200 Ohms +/-30%
Weight: 113g (4oz)
Cable: Permanently-attached 0.9 m (3') cable terminated with a 3.5 mm mini-jack plug

AT-ATR6550

Audio-Technica ATR6550 Short Shotgun Condenser Microphone IN STOCK

£69 each including Vat

The CS-50 is a compact, light-weight stereo condenser microphone designed for the videographer, broadcaster, and sound designer. The CS-50 features bass roll-off capability as well as selectable wide stereo or narrow (focused) polar patterns.


Main Specifications

Element: Back Electret Condenser
Polar Pattern: Line Cardioid
Frequency Response: 50 - 20,000Hz
Open Circuit Sensitivity: 14.9 mV/Pa, -36.5 dBV @ 1 Pa
Impedance: 200 Ohms
Maximum Input SPL.:126 dB SPL (at 1kHz, 1% T.H.D. Typical)
Signal to Noise Ratio: Greater than 70 dB (at 1kHz/1Pa)
Power Requirements: 48 V Phantom x 2ch
Current Consumption: 3.8 mA (Typical)
Weight: 83 g
Supplied Accessories: windscreen, desktop prop, mic stand adapter, cable (2m x L/R stereo) and soft case.

Optional Reinhardt Pistol Grip & Whisper Wind-Gag - see our Microphone Accessories section

EDI-CS-50

Edirol CS-50 Short Shotgun Stereo Condenser Microphone NORMALLY IN STOCK

£365 each including Vat

The Rode NTG-1 is a budget-priced, lightweight condenser shotgun microphone, specifically designed for professional applications within the film, video, television, voice-over and ENG industries. The NTG-1 provides an electronically balanced output stage and operates on 48V phantom power. It offers wide bandwidth and a controlled polar response coupled with low noise SMT electronics. The NTG-1 is extremely lightweight making it ideal for mounting on a Boom pole. This gun mic comes complete with a mount, windshield and case. The foam windscreen effectively suppresses wind noise when recording outdoors in moderate conditions (a light breeze). For more demanding applications.

• Broadcast sound quality

• Low noise circuitry

• Condenser transducer

• Rugged metal construction

• Low weight: 105 grams approx. (3 oz.)

• Low handling noise

• Supplied with stand mount, zip pouch and windshield

• Designed & manufactured in Australia

• Full 2 year guarantee

Click here for a PDF leaflet on this mic.

Main Specifications

Acoustic principle: Line plus Gradient
Directional pattern: Super-Cardioid
Frequency range: 20 Hz ~ 20 kHz selectable HPF @ 80 Hz/12 dB octave
Output impedance: 50Ω
Signal/Noise ratio DIN/IEC 651: 76dB (1kHz rel. 1 Pa; per IEC651, IEC268-15)
Equivalent noise: 18dB SPL (per IEC651, IEC268-15)
Maximum SPL: 139dB (@ 1% THD into 1 kΩ)
Sensitivity at 1 kHz into 1 kΩ: -36dB re 1 Volt/Pascal (15mV @ 94 dB SPL) +/- 2 dB (at 1 kHz in free field into open circuit)
Dynamic range - Amplifier DIN/IEC 651: 121dB (per IEC651, IEC268-15)
Power (Supply voltage): P48 Phantom, 44 V to 52 V Current consumption: 3.5 mA
Output Connection: 3 pin XLR, balanced output between pin 2 (+), pin 3 (-) and pin 1 (ground)
Weight approx.: 105g approx. (3.37oz.)
Dimensions: 217 mm (8-9/16”) x 22mm (7/8")
Optional Rode Fur Wind-Gag & Suspension - see our Microphone Accessories section
Optional Reinhardt Soft-Zep 2 Windshield, Grip & Cover - see our Microphone Accessories section

RO-NTG1

Rode NTG1 Short Shotgun Directional Microphone, Phantom Power (requires any of our Connectronics microphone leads - click here to be taken to a choice of these on our Microphone Accessories page) - IN STOCK

£159 each including Vat

Essentially the NTG2 is a version of the NTG-1 above, but with the additional choice of internal battery powering using a 1.5V AA battery, as well as being able to operate on 48V phantom power.

• Broadcast sound quality

• Low noise circuitry

• Condenser transducer

• Rugged metal construction

• Low weight: 105 grams approx. (3 oz.)

• Low handling noise

• Supplied with stand mount, zip pouch and windshield

• Designed & manufactured in Australia

• Full 2 year guarantee

Click here for a PDF leaflet on this mic.

Main Specifications

Acoustic principle: Line plus Gradient
Directional pattern: Super-Cardioid
Frequency range: 20 Hz ~ 20 kHz selectable HPF @ 80 Hz/12 dB octave
Output impedance: 250Ω (phantom power), 350Ω (battery power)
Signal/Noise ratio DIN/IEC 651: 76dB (1kHz rel. 1 Pa; per IEC651, IEC268-15)
Equivalent noise: 18dB SPL (per IEC651, IEC268-15)
Maximum SPL: 131dB (@ 1% THD into 1 kΩ)
Sensitivity at 1 kHz into 1 kΩ: -36dB re 1 Volt/Pascal (15mV @ 94dB SPL) +/- 2 dB (at 1kHz in free field into open circuit)
Dynamic range - Amplifier DIN/IEC 651: 113dB (per IEC651, IEC268-15)
Power (Supply voltage): 1.5V Alkaline Battery or P48 Phantom
Current Consumption: 2mA
Battery Life: >400 hours with fresh alkaline battery
Output Connection: 3 pin XLR, balanced output between pin 2 (+), pin 3 (-) and pin 1 (ground)
Weight approx.: 161g approx. (5oz.)
Dimensions: 278 mm (8-9/16”) x 22mm (7/8")
Optional Fur Wind-Gag & Suspension - see our Microphone Accessories section
Optional Reinhardt Soft-Zep 2 Windshield, Grip & Cover - see our Microphone Accessories section

RO-NTG2

Rode NTG2 Short Shotgun Directional Microphone, Phantom/Battery Power (requires any of our Connectronics microphone leads - click here to be taken to a choice of these on our Microphone Accessories page) - IN STOCK

£169 each including Vat

Whilst Rode's NTG1 & 2 are designed and built to a budget, their NTG3 is their premium, flagship shotgun microphone. It is the result of years of development by Rode engineers, providing the professional broadcast and film industries with a truly uncompromising microphone.

Using a technology known as RF-bias, the Rode NTG3 is almost completely resistant to moisture, making it the only option when recording in any demanding environments where condensation is an issue. For example, a rainy English location shoot or when shooting in a humid jungle environment. When using most condenser mics in such conditions, sound recordists are regularly plagued by microphone noise (all sorts of spurious clicks and pops) and sometimes even microphone failure. So, if you need to be sure, the Rode NTG3 is your safest option.

In addition to its robust properties the NTG33 combines very low weight (163g), a durable anti-glare finish and incredibly low handling and self-noise (13dBA) to become their top-of the range shotgun microphone. And when not in use your NTG3 can be stored away in the included weather resistant aluminium storage cylinder, providing additional protection when travelling and storing the microphone. In short - if you want the best in performance and reliability, buy the NTG3.

• Designed to withstand adverse environmental conditions

• 50% less self-noise than the majority of shotgun microphones

• True condenser (externally RF biased)

• Extremely low handling noise

• High level of immunity to radio frequency broadcast

• Superior broadcast sound quality

• Weather resistant aluminium storage cylinder included

Click here for a PDF datasheet on this mic
Click here for the NTG3 owner's manual

Main Specifications

Acoustic principle: Line Gradient
Directional pattern: Super-Cardioid
Frequency range: 40Hz ~ 20 kHz
Output impedance: 25Ω
Signal/Noise ratio DIN/IEC 651: 81dB SPL (A-weighted per IEC651)
Equivalent noise: 13dB SPL (A-weighted per IEC651)
Maximum SPL: 130dB (@ 1% THD into 1kΩ)
Maximum output voltage: 8.2dBu (@ 1% THD into 1kΩ)
Sensitivity: -30dB re 1 Volt/Pascal (31.6mV @ 94dB SPL) +/-2 dB @ 1 kHz
Power (Supply voltage): P48 (48V) Phantom
Output Connection: 3 pin XLR, balanced output between pin 2 (+), pin 3 (-) and pin 1 (ground)
Weight approx.: 163g approx. (5oz.)
Dimensions: 255mmH x 19mmW x 19mmD
Optional Rode Blimp Windshield, Suspension & Grip - see our Microphone Accessories section

RO-NTG3	Rode NTG3 Premium Short Shotgun Directional Microphone, (requires any of our Connectronics microphone leads - click here to be taken to a choice of these on our Microphone Accessories page) - IN STOCK		£449 each including Vat
RO-SM4	Rode SM4 Suspension Mount for Rode NTG3 Short Shotgun Microphone (see NTG3 fitted to the SM4 in our picture above) - IN STOCK		£46 each including Vat